Description
- Origin: Mainland China
- Certification: CE
- Model Number: FB-04 500mW
What’s the diference between
FB03 Series
and
FB04 Series
Laser Module? When or why do i need to have a FB04 Series Laser Module?
FB03 Series
and
FB04 Series
Laser Module? When or why do i need to have a FB04 Series Laser Module?
–
It depends on what the interface for laser module on your controller board is like.
– The controller board of EleksMaker Series Engraver is designed with a 3-Pin (12V/GND/PWM) interface for laser module, so you need to buy a FB03 series module.
– If the controller board of some other no-name engravers is designed with 2*2-Pin (1 for DC voltage, 1 for PWM/TTL modulation)
interfaces, then you need to buy a FB04 series module to fit it.
interfaces, then you need to buy a FB04 series module to fit it.
Specification:
| General Specification | |
| Model | FB04-500 |
| Heatsink Material | Aircraft Aluminum |
| Luminous Color | Blue Violet |
| Section Size | 33mm x 33mm |
| Mounting Hole | M5 (central), M3 (around) |
| Cooling Mode | Heat Sink Groove, Cooling Fan |
| Adapter Plug | US Plug |
| Adapter Input Voltage | AC 100-240V |
| Adapter Output Voltage | DC 12V 2.5A |
| Can Engrave | MDF/Balsa/Paper/Wood/Fabric/Plastic/Leather/Plywood/Foam Paper/Anodized Aluminum |
| Can Not Engrave | Metal/Glass/Stone/Ceramics/Stainless Steel/Reflective Material/ Transparent Material |
| Technical Parameters | |
| Laser Power | 500mW /0.5W |
| Wavelength | 405nm |
| Beam Shape | Dot (Focusable) |
| Working Voltage | DC 12V |
| TTL/PWM Modulation | YES |
| Power Input Interface | 2.54-2P |
| TTL Interface | 2.54-2P |
| Drive Mode | External ACC Constant Current Drive |
| Life Time | >10,000 hours |
Features:
1. The voltage for power port((VCC, GND 2 Pins Port) is DC 12V, the voltage for PWM port (PWM, GND 2 Pins Port) is DC 5V.
2. 405nm 500mW focusable blue violet laser module, with TTL or PWM functions (TTL and PWM are compatibe while TTL can control the switch and PWM can control the power).
3. Aircraft aluminum heatsink with cooling fan ensure long working time continuously.
4. Equipped with constant-current driver board ensure stable output optical power, low heat, no external driver board needed,easy to use.
5. Suitable for industrial laser engraving machine equipment usage.
