5mw LDS Laser Diode For Mi 1st Robot Vacuum Cleaner Parts Replacement LDS Laser Light Accessories Vacuum Cleaner Part

5mw LDS Laser Diode For Mi 1st Robot Vacuum Cleaner Parts Replacement LDS Laser Light Accessories Vacuum Cleaner Part

Please kindly note:

Mi 1st 2nd Generation Robot Vacuum(year 2016/ 2017) Lidar 785nm 7mw Near-infrared Laser Module Laser Head

• Please ask skilled man to repair it.

• Do not support Hot-plugging.

• Please Don’t use it For a longer time without heat sink. The item is tested with heat sink. Duty cycle without heat sink: 5 seconds on, 1 second off.

• Light spot is positioned at 8 meters, Position moving is less than 2mm Within 8 hours normally.

• If not position the light spot , it may not work properly

• It is IR laser. The laser light cannot be seen by human bare eyes. Only using DDC/infrared camera to get it.In a dark environment, it can also be used to judge whether the original laser tube is broken. If it is broken, there is usually a little light, which can also be seen, and the position can be 6-Meter distance, you need to test up, down, left, and right positions.

• This module is dedicated for 360-degree laser ranging without a driver. When replacing it, you need to fix the original position of the laser spot, and then replace it and adjust it to the original spot position and glue it.

• Warranty: no warranty because laser diode is consuming material

• Datasheet: you can get for Google a datasheet.

Specifications:

• Current: <40mA
• Working temperature: -10 degrees-+70 degrees
• Modulation frequency: <30MHz
• Wavelength: 780nm
• Power: 5mw
• Compatible with : For MI 1st Vacuum Cleaner

Packing Include:

• 1PCS Laser Diode